Wave Adge Wire Basket Tray 300x50mm On Sale
Basic Info
Model No.: BM
Product Description
Wire Mesh Cable Tray Detailed Information:
a. A job site, field adaptable support system primarily for low voltage telecommunication and fiber optic cables. These systems are typically steel wire mesh, zinc plated.
b. Standard widths of 1.5, 2, 4, 6, 8, 12, 16, 18, 20, and 24 inches
c. Standard depths of 1, 2, and 4 inches
d. Standard length of about 10 feet (118")
Wire Mesh tray is generally used for telecommunication and fiber optic applications and are installed on short support spans, 4 to 8 feet Other sizes be produced according to customer’s drawing.
Wire Mesh Cable Tray Surface Finish:
♦ Electro zinc plated–for indoor use to BS EN 12329-2000, 12microns thick.
♦ Hot Dipped Galvanized–for outdoor use to BS EN 1461-1999, between 60 and 80 microns thick
♦ Electrolytic Polishing–for stainless steel use
Wire Mesh Cable Tray System Materials
Wire Mesh Cable Tray Material:
Q235 Steel (Chinese standard steel), SS304, SS316
Wire Mesh Cable Tray Installation Notice:
Bends, Risers, T Junctions, Crosses and Reducers can be made from wire mesh cable tray straight sections flexibly in projects.
Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer.
Wire Mesh Cable Tray systems can be safely employed in places where the temperature ranges between -40°C and +150°C without any change to their characteristics.
Wire Mesh Cable Tray Specification:
Item | Size(mm) | Width(mm) | Height(mm) | length(m) |
1 | 50*50 | 50 | 50 | 2.44/3 |
2 | 100*50 | 100 | 50 | 2.44/3 |
3 | 200*50 | 200 | 50 | 2.44/3 |
4 | 300*50 | 300 | 50 | 2.44/3 |
5 | 100*100 | 100 | 100 | 2.44/3 |
6 | 200*100 | 200 | 100 | 2.44/3 |
7 | 300*100 | 300 | 100 | 2.44/3 |
8 | 150*150 | 150 | 150 | 2.44/3 |
9 | 200*150 | 200 | 150 | 2.44/3 |
10 | 300*150 | 300 | 150 | 2.44/3 |
Product Categories : Wire Mesh Cable Tray > BM5 Wire Mesh Cable Tray Wave Edge (H=50)