Steel Galvanized Perforated Cable Ladder Roll Forming Machine
Product Description
The Cable Tray is a special type of Perforated Cable Tray electrical which provides good performance in commercial and light industrial electrical applications. Cable tray galvanized refers perforated cable tray whose surface is fabricated by using quality raw material Pre-galvanized
Flexible to install, its good performance combined with a visually appealing profile in the electrical industry. For general use indoor, with a clean looking finish, the tray is offered in pre-galvanized steel, however,if use outdoor that need the extra corrosion protection,hot dip galvanized after fabrication cable trays are available.
Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
Technical parameters:
| Serial number | Item | Unit | Parameters | Remark | |
| 1 | Suitable material | Type | Q235, galvanized sheet | ||
| strength | MPa | ≤235 | |||
| Thickness | mm | 1.5mm~2.0mm | |||
| Coil internal diameter | mm | 500 | |||
| Coil weight | T | 2 | |||
| 2 | Specification | mm | Φ380~Φ530mm | ||
| 3 | Line speed | m/min | 10 | ||
| 4 | Roller material | GCr15 | |||
| 5 | Roller driven type | External chain transmission | |||
| 6 | Operating system | Windows2000 | |||
| 7 | Total motor power | Kw | About 11 | ||
| 8 | Electric control system | PLC automatic control system | |||
| 9 | Dimension(L*W*H) | m | |||
Uncoiling- -roll forming --punching--cutting –discharging
Why choose Linear cable tray roll forming machine?
1. In the design of punching part, we adopt servo feeding technology to make sure that the punching accuracy can reach more or less than 0.15 mm.
2. For making the finsihed cable tray without distortion in perfect shape, which may be caused by rear cutting, our cable tray roll forming machine is designed with front cutting device. This roll forming production line is also equipped with a proper guiding device to ensure that the front-cutting sheet can be fed into the roll former correctly.
3. Our cable tray roll forming machines (cable tray roll forming production lines) are designed with cantilever so that the width can be adjusted automatically by electronic controller.
4. Machine left frame could be moved fully automatic to expand the cable tray width.
5. Middle plate frame with protection guard to make sure the security when using machine.
Product Categories : Electric Industry Roll Forming Line > Cable Tray Roll Forming Line